The specialty silicone PU heat transfer vinyl has a fluorescent green front and a red back, and is soft to the touch. The combination of fluorescent green and red can create a high contrast and bold effect.
This heat transfer vinyl has the ability to achieve a three-dimensional effect that can add depth and texture to a design. It can also achieve two-tone effects, allowing for more creative and visually interesting designs. This can be achieved by layering the vinyl in a specific way to create the appearance of two different colors.
Additionally, this type of tshirt vinyl can be combined with an embosser to create more texture and visual interest in your designs.
How to use Silicone PU heat transfer vinyl
Design: Create or obtain the desired design for your project. The design must be in vector format, as this will allow for accurate cutting of the vinyl.
Cut: Use a vinyl cutter to cut the design out of the Silicone PU heat transfer vinyl. Be sure to adjust the settings on your cutter to match the thickness of the vinyl you are using.
Weed: Remove any unwanted vinyl from the design using a weeding tool. This process is called “weeding” and is essential for achieving a clean final product.
Prepare textile item: Prepare the textile item by washing and drying it to remove any dirt or debris that may interfere with the vinyl’s adhesion.
Heat press: Use a heat press to transfer the vinyl design onto the textile item. Set the temperature and pressure settings on your heat press to the recommended levels for your vinyl type and the textile item you are using. Place the vinyl design onto the textile item, cover it with a sheet of parchment paper, and press for the recommended time.
Peel: Once the pressing is complete, peel the transfer paper from the vinyl design while it is still warm.
Finished product: Your custom design should now be successfully transferred onto the textile item.